Waste Water Evaporators – Even in our drought-ravaged country, torrential rainfall may not be welcome. That’s certainly the case for a large regional area in Western Australia. The local council built a wastewater pond that is so enormous, it’s reportedly visible from space.

The purpose of the pond is to collect water to prevent minor flooding when those enormous rainfalls hit. But it’s not a dam. The local council management team needed a way to dispose of all that water.

The equipment already in place did not quite achieve the evaporation rates, efficiency and reliability the council engineering team were after. Hence, they were looking for another solution. After some initial research, the WA council engineers contacted Tecpro Australia and asked for advice. They got it by the “bucket load”, so to speak.

Tecpro’s technical team suggested the E46 Floating Evaporator from EmiControls. This Evaporator uses specially designed and patented nozzles to draw air into the water stream to produce water droplets that evaporate more readily. The unique design of the nozzles also minimises the drift of potentially contaminated water droplets outside the perimeter of the wastewater pond.

The E46 Floating Evaporator is modular so multiple units can be used in the same pond to achieve more rapid evaporation. In the case of the WA wastewater pond, three Floating Evaporators are in use. While this may seem like a lot of Evaporators, the wastewater pond holds over 60 million litres of water. That makes the Evaporators look tiny by comparison.

Amazingly, each Evaporator is removing approx. 100 m³/day.

When it comes to operation, each E46 system can be regulated from its own control panel or multiple evaporators can be run from one single control panel. The council decided to use individual controls for each Evaporator to safeguard the system and ensure it was always operational.

The E46 Floating Evaporators have 4 HDPE UV stabilised pontoons. The evaporation nozzles also use HDPE to cope with hazardous or corrosive liquids. Each unit has a stainless-steel lifting frame as well.

Everything you need to assemble the E46 Evaporator comes in a single crate. Best of all, it requires minimal tools and no technical expertise to assemble. In fact, it should only take an hour or two to assemble and have each Evaporator operational.

The E46 Floating Evaporators are ideal to use in wastewater ponds, as they did in WA, as well as in desalination plants, mining operations and decontamination applications. In Australia and New Zealand, these Floating Evaporators are available exclusively from Tecpro Australia – a specialist engineering supply company.

For more information on the E46 Floating Evaporators or for expert technical advice, contact the team at Tecpro Today!