For years, the humble ball valve has been the go-to method for controlling flow in industrial cleaning and foaming systems. It’s simple, reliable, and widely understood. But in environments where operators are constantly starting and stopping flow, particularly during foam cleaning, it’s far from ideal.

Anyone who has spent time on a washdown hose knows the routine. Turn the valve on, apply foam, turn it off, reposition, and repeat. Over the course of a shift, this constant manual operation becomes inefficient and, more importantly, wasteful. Ball valves are designed for isolation, not for repetitive, on-demand control. As a result, they tend to be left partially open or run longer than necessary, leading to excess water and chemical usage.

This is where the Squeezer valve from Tecpro Australia presents a genuinely smarter alternative.

Rather than relying on a quarter-turn valve, the Squeezer introduces a far more intuitive way to control flow. With a simple squeeze of the handle, the operator has immediate control—flow starts when needed and stops the moment the handle is released. There’s no lag, no overrun, and no second thought required. It’s a small change in operation, but one that makes a noticeable difference almost immediately.

In foaming applications, that level of control is particularly valuable. Producing good foam isn’t just about pressure and equipment; it’s about how the operator applies it. Too much flow and you waste chemicals. Too little and coverage suffers. With the Squeezer valve, foam can be applied precisely where it’s needed, without overspray or unnecessary runoff. Over time, this translates into better cleaning results and lower operating costs – something every facility is looking to achieve.

There’s also a clear benefit from an ergonomic standpoint. Repeatedly turning a ball valve throughout the day isn’t just inefficient, it’s tiring. The Squeezer’s trigger-style operation is far more natural, reducing strain and making it easier for operators to maintain consistent performance across longer cleaning cycles. In busy environments like food processing plants or abattoirs, where washdown is constant, that improvement in usability shouldn’t be underestimated.

From a design perspective, the Squeezer is built to handle exactly these types of conditions. Its stainless-steel construction makes it suitable for demanding industrial use, while the blue EPDM outer cover provides both thermal insulation and clear visual identification in hygiene-sensitive environments. It’s equally at home handling water or foam and integrates easily into existing systems thanks to standard ½” BSP connections and optional quick coupler.

What makes the Squeezer particularly appealing is how simple it is to implement. There’s no need for major system changes or capital investment. In most cases, it can be installed in place of an existing ball valve, immediately improving control and efficiency without disrupting operations.

It’s rare that such a small change in hardware can have a meaningful impact on both performance and cost, but this is one of those cases. By giving operators better control over flow, reducing waste, and improving ease of use, the Squeezer addresses a problem that many sites have simply learned to live with.

Ball valves will always have their place in industrial systems, but when it comes to operator-controlled foaming applications, there’s now a more practical option. The Squeezer from Tecpro Australia isn’t just a different way to control flow – it’s a better one.

The Squeezer and its attachments as well as, satellite foamers and hose reels are exclusively available from Tecpro Australia. They are specialists in the supply of guns, lances, nozzles and hose reels. In fact, their range is one of the largest in both Australia and New Zealand. They can also assist with designing, fabricating or sourcing solutions for your particular application.

For more information or help, call Tecpro on +61 (02) 9634 3370 or email sales@tecpro.com.au