Home » Our Products » Spray Nozzles » Air Atomising Nozzles » AKIMist Dry Fog Humidifier

AKIMist Dry Fog Humidifier

Connection: Quick Connect, Spray angles: 45° – 360°, Capacity: 0.04 – 0.2 L/min, Material: AISI 303, PP, PTFE,

Flow Rate

lpm@3bar 0.04 to 0.16)

Material

AISI 316L s.s. PVDF PP

Connection

Male BSPT 1/4" & Quick Connect

Description

AKIMist Dry Fog Humidifier

Spray capacity 2.4–9.6 L/hr Mean droplet diameter 7.5 μ

Features

•Energy-saving humidifiers with pneumatic spray nozzles producing Dry Fog**.
•With world-leading technology, our AKIMist Dry Fog Humidifier produces ultra-fine “non-wetting” Dry Fog, which doesn’t wet the objects it touches. 
•Prevents dryness and static electricity, enabling higher manufactured product quality and lower defect rates.
•The running cost is one-fifth of a comparable steam humidification system.
•For spraying chemical solution, chemical-resistant AKIMist® “E” TN is available. 

** We define Dry Fog as a very fine fog with a uniform, mean droplet diameter (mean fog droplet size) of 10 μ or less.
Because Dry Fog’s exceedingly fine spray droplets remain intact without bursting when they come into contact with objects such as walls and people, they do not wet these impact surfaces.
“Dry mist,” despite its similar name, has much larger droplets than Dry Fog and has no specified droplet diameter as part of its definition. Dry mist droplet sizes vary significantly by producer and product.

Applications

Static electricity prevention: Prevents/reduces troubles caused by static charge, such as product damage, (electrostatic damage) and debris/dust adhesion, etc.
Energy saving: The running-costs of our system are only one-fifth of a typical steam humidification system, resulting in drastic energy savings.
Cooling effects: The system also yields a cooling of about 2„ƒ, reducing temperatures with evaporative cooling (using the principle of heat loss due to water evaporation of Dry Fog).
Health-related benefits: Maintaining a relative humidity level of 50% dramatically reduces cold viruses, influenza (flu) viruses and so forth, thus reducing worker absences caused by illness.

[Electronics]
•Preventing electrostatic discharge damage during assembly, mounting/installation and tests; preventing debris and dust adhesion; mitigating rises in incorrect-chucking rates; preventing mounting errors.

[Paper & Pulp, Printing]
•Rotogravure printing: Preventing ink pan and ink roll fires, preventing debris and dust adhesion to films and papers, dust suppression, reducing ink striation from doctor and/or plate cylinder, preventing adhesion of debris caused by ink’s electrostatic charge.
•Screen printing: Preventing print defects caused by feathering, misregistration, streaks, blurring, etc.; preventing fading caused by plate dryness; productivity improvements.
•Offset printing: Controlling moisture content of paper; preventing paper break (web break), jams, and misalignment; reducing paper tearing; improving folding precision; preventing color drift; preventing curl.
•Others: Form printing, humidification for cardboard production.

[Automotive manufacturing]
•Preventing dust and debris adhesion in the body and bumper coating, inspection processes; dust suppression in storage rooms; static charge prevention in vehicle electrical components production and circuit board mounting process; heatstroke countermeasures; shortening cycle times.

[Plastics production]
•Reducing work efficiency declines caused by static electric shock, preventing fires, preventing scattering of debris and body hair, preventing adhesion of debris, preventing toppling of stacked items caused by static electricity.

[Inks, Paints and Coatings]
•Preventing debris adhesion in painting/coating process; cissing prevention; preventing fires during paint/coating preparation processes, in areas around reaction tanks and mixers, and during filling processes for substances such as pigments and coatings.

[Agriculture, Livestock]
•Maintaining optimal humidity level in plant factory, greenhouse, and storage warehouse; humidification for mushroom nurseries; disinfection.

[Other industries]
•Humidification and dust suppression in machine parts production, textile industry, agriculture, livestock and warehouses, etc.

Industries in which this product is used

Machinery, Electronics, Paper & Pulp, Printing, Food products, Agriculture, Livestock, Automotive manufacturing, and Energy

Product specifications

Mass

Approx. 340 g (Loaded)

Outer dimensions

Dry Fog Humidifier

Stop plugs are enclosed to reduce the number of nozzles when needed.
Note: The above drawing is one example of AKIMist® “E” (with 4 pcs. of 03C type nozzles mounted). Contact us for details.

Material
Body PP, S303
Nozzle S303, PPS, PTFE
O-ring NBR, FKM
Packing NBR
[Note]
*126 for AKIMist® “E” with 03B nozzle type.

•  When using our Standard Kit for installation, the kit is R1/4” threaded for both air and water lines.
•  Before disassembly, close the water valve to prevent water leaks.
•  As main parts are made of plastic, handle AKIMist® “E” with care. (For details, see the instruction manual.)
•  “F” in pipe connection size denotes female taper pipe thread.
Appearance and dimensions may differ depending on nozzle codes and materials. Contact us for details.

Others

Specifications of AKIMist® “E” (per body)

Nozzle type Model No.

Number of nozzles

(pcs.)

At air pressure of 0.3 MPa

Mean droplet diameter

(μ) (*4)

Spray volume

(L/hr)

Air consumption

(L/min, normal)

03C AE-1(03C) 1 2.4 29 7.5
AE-2(03C) 2 4.8 58
AE-3(03C) 3 7.2 87
AE-4(03C) 4 9.6 116
03B AE-1(03B) 1 3.3 29 12
AE-2(03B) 2 6.6 58
AE-3(03B) 3 9.9 87
AE-4(03B) 4 13.2 116
04E AE-1(04E) 1 3.0 36 10
AE-2(04E) 2 6.0 72
AE-3(04E) 3 9.0 108
AE-4(04E) 4 12.0 144

Product Enquiry

Technical Info

Dry Fog Disinfection System
Disinfection
Inside of Greenhouse Humidification
Humidification
Crusher Dust Suppression
Dust Suppression Systems and Dust Control Solutions
Food humidification by Tecpro Australia
Humidification of Produce
Evaporative Cooling Mist System
Evaporative Cooling

Title

Go to Top