| |
|
Water
Jet Cutting and Abrasive Jet Nozzles
For pressure up to 60,000 PSI
|
Focusing Nozzles
Extra Long Life Focusing Nozzles (mixing tubes) to suit KMT, Flow Systems, Allfi,
Jet Edge Abrasive Cutting Heads |
| |
KMT |
|
|
|
Outside Diameter |
Length |
Inside Diameter |
9.4mm |
76mm |
0.76mm |
9.4mm |
76mm |
1.00mm |
|
Flow Systems |
|
|
|
Outside Diameter |
Length |
Inside Diameter |
7.1mm |
76mm |
0.76mm |
7.1mm |
76mm |
1.00mm |
|
Allfi, Jet Edge |
|
|
|
Outside Diameter |
Length |
Inside Diameter |
6.3mm |
76mm |
0.76mm |
6.3mm |
76mm |
1.00mm |
| |
|
|
|
Other sizes available on request. |
|
| Integral Diamond Eductor |
The H20 Jet Integral Diamond Eductor provides a fast, accurate cut due to the precise alignment of the orifice with the mixing tube which in turn can reduce garnet consumption and increase carbide life.
Watch Video of Integral
Diamond Eductor
|
  |
|
| Spare Parts |
| High pressure seal kits, check valve repair kits, standard or high load piston and plunger assemblies are all available. You can also obtain all your flow systems compatible spare parts. Contact us with your part number and description of the part you are looking for. |
   |
| Blue Goop |
Thread lubricant used to eliminate galling on any material for
temperatures up to 204°c.
Contact us to order your Blue Goop |
 |
|
| Intensifier Assembly |
- Mechanical Shift or Electronic Shift
- Hi load
- Rated to 40,000 psi or 60,000 psi
Intensifier short blocks also available
Contact us for a H2O
Jet catalogue on CD
|
 |
|
| Intensifier Pumps |
The H2O Jet intensifier pump maintains the maximum pressure and flow while virtually eliminating pressure fluctuations. With a simple and straightforward design you can improve the quality of your cuts at a faster speed.
- Maximum Flow Rate - 10.3 l/m
- Maximum Pressure - 60,000 PSI
- Maximum Orifice Size - 0.025"
- 50 or 100 HP
Contact us for more information
|
 |
| |
|
|
|
