A broad range of technical expertise and a comprehensive knowledge of the spray nozzle industry allows Tecpro to solve challenging spray nozzle problems. Take a look at the following case studies.

Dust Suppression Solution For Building Material Recycling Plant

A suburban Sydney building material recycling plant needed to reduce the amount of dust which was being carried by the wind, onto adjoining properties. 

Read Dust Suppression Solution Case Study

Gas Scrubbing Problem Reduced at Port Kembla Copper

Port Kembla Copper needed to reduce an excessive amount of acid being carried with gases out of the exhaust tower into mist collectors. There was more acid than the collectors could cope with and they were overflowing.
Read Port Kembla Copper Case Study

Special Gas Cooling Nozzles Protect Bag Filters at Playford Power Station (South Australia)

As part of a refurbishment Alstom Power required special emergency gas cooling sprays. These sprays were designed to operate when the gas reaches a defined temperature, and rapidly reduce gas temperature to prevent the gas igniting the bag filters.
Read Playford Power Station Case Study

Australian Designed Nozzle Helps Improves Output at Local Mini Mill

The Mini Mill (OneSteel) were revamping their Billet Casting process to increase both production, dimensional consistency, and reduced scale on the billet. Cooling sprays were seen as a key factor in achieving this.
Read Local MIni Mill Case Study

Abrasivejet / Waterjet Cutting Head Saves Garnet for Laser Wizard

A new water jet cutting head was required because the old, unreliable one was coming to the end of it’s life.
Read Laser Wizard Case Study

Dust Suppression with Ultrasonic Atomisers at Bosphorus Nickel Project (Turkey)

A major Engineering design and consulting company (Aker Kvaerner) required a dust suppression system for the primary crusher and conveyor transfer points of the Bosphorus Nickel Project in Turkey.
Read Bosphorus Nickel Project Case Study